Saturday, September 15, 2018

1960 Dodge Polara -- a very rare survivor




Seen at Cars and Coffee at Carillon Park. This car is an original, and in terrific shape for its age. Not many of these around anymore.









The styling Genius of Virgil Exner!

The 1960 Polara and other full-sized Dodges featured styling cues carried over from 1959 models, itself an evolution of Virgil Exner's "Forward Look" cars introduced in 1957. The top-of-the line Polara and Dodge Matador continued to ride on the 122-inch (3,099 mm) wheelbase of their predecessors, while a new line-up of still full-sized Dodge Darts rode on a shorter 118-inch (2,997 mm) wheelbase. The Polara was available as a 2-door convertible, 2-door hardtop, 4-door hardtop sedan, 4-door hardtop station wagon, and conventional (pillared) 4-door sedan. 
Like these cars, both 1960 full-sized Dodges continued with the make's styling hallmarks of stacked "jet pod" tail lights, however, the size of the lights was greatly increased compared to the previous year's lamps, with the lower lights set into the rear bumper. The design also incorporated Dodge's trademark shortened tail fins, which, on the Polara, included small vertical tail light lenses placed on the vertical surface at the back of the fin; again, the purpose of the shortened fin was meant to exaggerate the length of the "jet pods" holding the tail lights.
The fins on Darts were shorter both in length and height because unlike the full sized Dodge's, the Polara and Matador, the Darts were based on the Plymouth and used much Plymouth sheet metal forms and the Plymouth rear door. The Plymouth rear door did not have any part of the fin whereas on the full sized Dodges the fin actually started on the rear door (on the 4-doors) and continued back from there. This allowed the fin to start sooner, on the door, and end sooner, relative to the tip of the round tail light and still appear as long or longer than on the Dart. The net effect was that the fins on the Dart look stunted whereas on the Polara and Matador the fins appear in proper proportion to the rest of the car. Up front, the car featured a small grille consisting of eight stacks of anodized aluminum rectangles nested in a massive (and complex) chrome front bumper assembly. As the top model in the line-up, the Polara featured better interior fabrics and trim treatments. Polaras also received more trim on the outside of the car, most notably a chrome stone guard aft of the rear wheel housings, a full-length chrome spear, and a wide chrome base to the chrome spear atop the headlight housings.

1 comment: