Tuesday, December 18, 2018

American Automotive Pioneers

American Pioneers
            The transition in national automotive leadership away from Europe and to the United States that took place during the first decade of the twentieth century is complex. One aspect that remains to be explored is the immigration of European automotive engineers to the United States. This matter of technology transfer is a phenomenon that certainly happened in the case of the Thomas Company located in Buffalo, New York where a number of French engineers were employed, and may have occurred elsewhere as well.25

The automotive history literature celebrates American innovation, but ignores European influence on the early development of the industry. It is as if the American industry evolved out of virgin soil, which is highly unlikely given the nature of the trans-Atlantic connections of that day. Certainly the United States had its native pioneers in terms of constructing prototype vehicles, or those made in small numbers, and also automobile manufacturers, who more often than not had previously been bicycle or carriage and wagon manufacturers.
            The pioneers included Charles and Frank Duryea, who assembled their first vehicle in 1893.26The brothers would later engage in bitter priority disputes that continued to the early 1940s.
Charles Duryea (LC)
Workmen in the Duryea factory in Springfield, Mass., working on some of the thirteen 1896 motor wagons. (Smithsonian photo 44062.) 

 Elwood Haynes, along with Edgar and Elmer Apperson, built their first car in 1894 in Kokomo, Indiana. 
1894 Haynes-Apperson


In 1895 Hiram Maxim installed a gasoline engine on a tricycle, and a year later Henry Ford demonstrated his Quadricycle.27Alexander Winton, a bicycle manufacturer in Cleveland, Ohio would soon follow with an unoriginal design of his own, but he was also among the first to manufacture vehicles in some quantity, marking him as a leader in the early automobile business, along with Colonel Albert A. Pope of Hartford, Connecticut. While Pope’s influence in the business would last only two years, to 1899, the Winton Motor Carriage Company flourished into the early twentieth century. 


His 13 customers in 1898 were capitalists, engineers, merchants and manufacturers, and the list tells us much about the first generation of automobile owners in the U.S. and Canada. From Epstein, pages 95-96:
For the Wintons sold in 1898…. {The list} summarized, it shows thirteen buyers designated either as manufacturers or capitalists, four as engineers or physicians, and there as merchants. The first commercial sale of a Winton car was to Robert Allison, a mechanical engineer from Port Carbon, Pennsylvania on April 1, 1898. …The twelfth Winton sale made, it is interesting to note, was to Colonel J.W. Packard of Warren Ohio, who later built the car bearing his name … the detailed distribution of the twenty first buyers of Wintons, according to occupation and locality, here follows:
           

2 mechanical engineers, Pennsylvania
2 railroad car manufacturers, Pennsylvania
1 oil pipe manufacturer, Pennsylvania
1 capitalist, Pennsylvania
2 coal operators, Pennslvania
1 coal dealer, Pennsylvania
1 brewer, Pennsylvania
1 engineer, New Jersey
1 locomotive manufacturer, New Jersey
1 physician, New York
1 electric manufacturer, Ohio
1 piano manufacturer, Missouri
1 flour miller, Minnesota
2 hosiery ,manufacturers, Ontario
2 dry goods merchants, Ontario[1]

1898 Winton



Winton, like Henry Ford, raced his cars, and in 1903 a Winton became the first car to cross the continental United States.[2]Other manufacturers of the period included George N. Pierce in Buffalo and Thomas L. Jeffery, who built the Rambler. Most significant was Ransom Eli Olds, whose curved-dash “Merry Oldsmobile,” built in Michigan, became an industry leader, with a production volume of 5,000 units in 1904 after  making 1,400 vehicles in 1900, 2,100 in 1901, 2,500 in 1902, and about 4,000 in 1903.” [3]A dispute unfortunately followed – disputes were all too common among pioneer inventors and manufacturers of the era – and while Olds would later set up another company called REO, his influence on the industry diminished. Former employees of Olds who got their start there and then proved to be influential later in the automobile industry included Jonathan D. Maxwell, Robert C. Hupp, Roy D. Chapin and Howard E. Coffin.
            During the first decade of the twentieth century, the number of firms active in the industry is staggering by today’s standards. Some of the names of the early car companies were Orient, Monarch, Walker, Gale, Wolverine, Maxwell, Stoddard-Dayton, Wayne, Holsman, Logan, and Lambert. John Rae summarized the state of the infant industry as characterized by easy entry, virtually no government restrictions, literally hundreds of companies, and sources of capital varying from giants like J. P. Morgan to local banks and patrons.28
                  With few exceptions, automobile manufacturers active during this first decade were assemblers of parts custom made by suppliers. These manufacturers of iron castings, tubing, bearings, nuts, bolts, engines radiators, wheels tires, and bodies – virtually every part of the car – made so many variants of these components that the industry was in  chaos by 1910, and only later rationalized by efforts at standardization, especially after the United States entered World War I.

            From Epstein, p. 39: For in the early days of automobile manufacturing, as distinguished from small-scale, experimental shop work, relatively few of the parts for a car were made within the plant of the “manufacturer.” His business was primarily one of assembly. He bought on credit from the parts makers, and he sold for cash to his customers, the automobile dealers and distributors. Thus a large part of his working capital was obtained through buying on 30 day or 60-day accounts; his business was in effect financed by parts makers. These parts makers, the producers of iron castings, of steel tubings and shafts, of bearings, springs, bolts and nuts, of engine, axle, and transmission parts, and of radiators, lamps, tires, wheels, bodies, and the hundred of other parts and accessories entering inot the construction of a csr, manufactured in most instances not to stock, but upon the order of the automobile maker. Most of these parts concerns were engaged in supplying other liens of business than automobile manufacturing. 
By 1910, conditions had become so bad in this respect that one parts maker fabricated 800 different sizes of lock washers, the various automobile manufacturers in the aggregate employed 1,600 different sizes of steel tubing, and 135 different analyses of steel, in all were being specified. It was soon seen that manufacturing was far more difficult and costly than was necessary, and the automobile makers themselves took action. Under the leadership of Messrs. Howard E. Coffin, Henry Souther, Coker F. Clarkson, and others, the work of the Mechanical Branch of the Association of Licensed Automobile manufacturers, followed by that of the Society of Automotive Engineers, eventually brought order out of chaos. Instead of 800 sizes of lock washers, 16 standard sizes were adopted. In place of 1,600 kinds of steel tubing, 210 were specified. The number of ally steels employed was reduced to less than 50. The standardization of parts thus brought about, it is interesting to note, resulted in neither the stagnation of mechanical designs not the stifling of individual initiative. Competition and variation in major features of design, and in special combination of designs, continued. As the superiority of the gasoline automobile was increasingly demonstrated over its steam and electric competitors, the geographic center of automobile manufacturing in the U.S. shifted from New England to the Midwest. The early, overwhelming choice of the internal combustion engine by Midwestern manufacturers was influenced by the region’s poor roads, which were nearly impossible for electrics to negotiate, relatively vast spaces when compared to the East, and by the availability of gasoline for fuel in sparsely-settled rural areas that lacked electricity. Since village blacksmiths were accustomed to repairing wagons and carriages, they can be considered the first generation of auto mechanics. 
            The presence of a vibrant carriage trade and other economic and geographic factors contributed to the emergence of Detroit as the hub of automotive manufacturing in America. Most certainly, however, the elusive factor of personality and the presence of the likes of Ransom Olds, Henry Ford, Henry Leland, and Billy Durant proved critical to the rise of Detroit as the “Motor City.”
Detroit


            To make a single prototype of a car is one thing, but to make it with uniform quality and in quantity is a very different challenge. The importance of high tolerance, uniformly machined parts like crankshafts and engine blocks, is usually credited to Henry Leland.29Leland learned machine tool techniques from a craft tradition that can be traced back to Eli Whitney at the Mill Rock armory and then later diffused and improved upon by Simeon North at Springfield and Roswell Lee and Harpers’ Ferry. High volume and economies of scale would be the central achievement of Henry Ford and his key employees at Ford Motor Company after 1908. The spectacular rise in American auto production is reflected in Table 1:
Table 1: American Motor Vehicle Production, 1899-1910
Year
Number
Value ($)
1899
600
1,290,000
1903
10,576
16,000,000
1904
13,766
24,500,000
1905
20,787
42,000,000
1906
23,000
50,000,000
1907
42,694
105,000,000
1908
49,952
83,000,000
1909
114,891
135,000,000
1910
200,000
225,000,000
Source:  “Motor Vehicles,”Encyclopedia Britannica (13th Edition), vol. 18, 920.
            Despite the presence in Cleveland, Ohio of pioneering firms that included Winton, Stearns, Gaeth, Washburn, Marr, Owen Rogers & Hanford, and Pennington, Richard Wager made the argument that Cleveland’s decline as the center for the automobile industry was the consequence of conservative bankers. In contrast, Detroit’s financial institutions were far more willing to take risks.30


[1]Epstein, pp. 95-6.
[2]Horatio’s Drive.
[3]Epstein, p. 37. 

3 comments: